| 
5.8 GHz wireless ethernet transmitter set, 2500 ft Product DescriptionProduct Features
- Transmits up to 20Mbps in standard mode and 50Mbps in super mode
- 8 user selectable channels, 802.11a technology
- Switch selectable setup with LED indicators for ease of operation
- Connects with standard Ethernet devices
- Connects to DVRs, video servers, IP cameras, router/hubs, etc.
- Uses encrypted communication for secure transmission
- Transmits up to 2500 (5.3GHz) or 3900 (5.8Ghz) feet
- Unique compact, rugged modular design for easy installation
- Plug and play operability
The MiniLink Wireless Ethernet system is a dual band wireless transmission system. It operates in the license free 5.3 and 5.8 GHz U-NII bands. The system consists of dual 802.11a RF modules. A secure encryption method is used to prevent unauthorized access to the system.
The MiniLink Wireless Ethernet (WES) system is designed as a plug and play CAT5/Ethernet cable replacement device. Installing the system is as easy as mounting the RF modules, pointing them at each other and connecting the power and Ethernet/CAT5 cables. Three LED indicators on the back of each module give power, link activity and signal level status.
The WES modules transmit bi-directional data at 20 Mbps in standard mode and 50 Mbps in super mode. Standard operation requires no computer programming. For advanced setup, such as WEP encryption programming, turbo mode, setting IP addresses and User ID/Password changes, the system employs an easy to use web browser interface.
WES modules operate on channels 2 - 4 in the 5.3 GHz band and channels 5 - 9 in the 5.8 GHz band. Individual channels are selected via a rotary switch on the side of each module.
The MiniLink Wireless Ethernet system enables a wide variety of IP cameras, DVRs, encoder/decoders and web servers to be used across wireless line-of-site links in ranges of 2500 (5.3GHz) feet or 3900 (5.8GHz) feet. In applications where it is not possible, cost effective or desirable to run a cable, WES modules are an ideal solution. Following are a few examples:
- Security & Surveillance - School and Corporate Campuses, Warehouses, Retail, Manufacturing, Public Attractions, Ranches, Stables and Farms
- Intelligent Traffic Control Systems - Highways, Intersections, Parking Lots and Garages
- Homeland Security - Ports, Airports, Borders, Utilities, Parks and Monuments
- Government Agency and Military - Bases, Forward Deployment, Special Operations Teams
- Law Enforcement - Local and State Police, Bomb Squads, Search and Rescue Teams
RF Modules
| RF SECTION | |
| Power Output | 1 W EIRP @ 5.3 GHz (maximum) |
| | 50 W EIRP @ 5.8 GHz (maximum) |
| Transmitting Frequency | 5.250 - 5.350 GHz (U-NII-2) |
| | 5.725 - 5.825 GHz (U-NII-3 / ISM) |
| Channel Capacity | 8 non-overlapping channels |
| | 5.3 GHz Band - 5280, 5300, 5320 |
| | 5.8 GHz Band - 5745, 5765, 5785, 5805, 5825 |
| Modulation | OFDM |
| Latency | <10 milliseconds |
| Receiver Sensitivity | -82 dBm for maximum data rate |
| Polarization | Linear, horizontal or vertical |
| Antenna Type & Gain | Small patch, 7.5 dBi @ 5.3 GHz , 7.8 dBi @ 5.8 GHz |
| | 6x6 patch, 12.2 dBi @ 5.3 GHz, 16.7 dBi @ 5.8 GHz |
| | Small patch in 18" dish, 24 dBi @ 5.8 GHz |
| Beam Width | Small patch - 90*, 6x6 patch 24* & 18" dish - 8* |
| Data Throughput Rate | Up to 20 Mbps - std mode, 50+ Mbps - super mode |
| | (3 channels maximum) |
| FCC ID | JRRWES |
| Industry Canada | 4887A-WES |
| |
|
| MANAGEMENT | |
| Interface | 10/100 Base T, half/full duplex, rate auto negotiated (802.3 compliant) |
| Frequency Selection | Rotary switch - channels 0 - 9 |
| Web Browser Interface | User ID/Password, Super Mode, IP Address, WPA2 AES and WEP Encryption |
| Access Method | Time division duplexing/Time division multiple access (TTD/TDMA) |
| Protocols Used | IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP |
| Network Management | HTTP |
| |
|
| MECHANICAL | |
| Physical | Environmental, sealed, billet aluminum, powder coated housing with UV stabilized PVC radome |
| Dimensions | 3.6" x 3.6" x 1.75" |
| Weight | 15.2 oz |
| |
|
| POWER | |
| Power Requirements | 12 - 20 VDC @ 3 W (Reverse voltage protected) |
| Power Method | Power-over-Ethernet (PoE) via power injector module ("mid-span" compliant - |
| | pins 4,5 positive - pins 7,8 ground) |
| Connector | RJ45 - in and out of power injection box |
| Cable Specifications | 100 Meters (328 Feet) on 24 AWG CAT-5 cable |
| |
|
| ENVIRONMENTAL | |
| Humidity | 95% non-condensing |
| Operating Temperature | -20F to +150F |
| |
|
| SYSTEM RANGES | |
| Up to 2600 & 3900 Feet | Integral directional patch antennas on both WEMs - |
| | 5.3 GHz - 2600 ft, 5.8 GHz - 3900 ft |
| Up to 2 & 4 Miles | Integral directional 6" x 6" 13-dBi patch antennas on both WEMs - 5.3GHz - |
| | 2 miles, 5.8 GHz -4 miles |
| Up to 30 Miles | Integral directional patch antennas on both WEMs mounted in 25 dBi dish |
| | antennas - 5.8 GHz only |
Power Injection Module
| MECHANICAL | |
| Physical | Plastic housing, not weatherproof |
| Dimensions | 2.6" x 2.6" x 1.1" |
| Weight | 2.5 oz |
| Interface | 2 - RJ45 connectors |
| |
|
| POWER | |
| Power Requirements | 12 VDC 500 mA (wall transformer supplied) |
| Power-over-Ethernet (PoE) | PoE "mid-span" compliant |
| | (pins 4,5 positive - pins 7,8 ground) |
| Indicator | LED - red |
| Connectors | DC Jack 2.5 mm x 5.5 mm |
| | center positive, 2 - RJ45 |
| |
|
| ENVIRONMENTAL | |
| Humidity | 95% non-condensing |
| Operating Temperature | -20F to +150F |
|
